There are vast amounts of techniques to decorate a floor of a home. The floor is the secret key to aping up our regular living space. Nowadays, there are many different ways to decorate our homes. Vinyl flooring is one of the tremendous and nice-looking makeovers that can be done independently because it’s that easy.
Tasks like these became possible for some easy-to-use cutters in today’s market that we are going to illustrate.
Table of Contents
List of The 6 Best Knife for Cutting Vinyl Flooring
| Image | Product | Details | Price |
|---|---|---|---|
 |
Norske Tools 13-inch Vinyl Flooring Cutter | 13 inches wide | Check Price |
 |
MANTISTOL MC-330 13″ Pro Vinyl Floor Cutter | 13 inches wide | Check Price |
 |
MantisTol 13″ Pro Vinyl Floor Cutter | 13 inches wide | Check Price |
 |
CHILI Tools Linoleum Knife | Blue-Black | Check Price |
 |
Red Devil 4608 2.5-Inch Heavy Duty Vinyl Flooring Knife | Black-Red | Check Price |
 |
XW Folding Vinyl Knife, Heavy Duty Utility Knife with Protective Cap | Silver, Black, and Yellow | Check Price |
1. Norske Tools 13-inch Vinyl Flooring Cutter
A Vinyl Plank cutter from Norske Tools Ltd is a great option when a proper plank cut is required. A standard-sized vinyl flooring cutter. It can cut planks 13 inches wide and 19/32 inches in thickness.
Using the procedure is easy and also lightweight. The cutter weighs 13pounds, which helps to carry it to different workstations and places. The Knife of the cutter is fine in quality. No other power source is necessary for operating the cutter.
Only the lever must be pulled down while the vinyl slides are under the cutting head. The end product, after cutting, gets a precise cut and clean edges. That Makes the planks easy to get fit in the necessary positions.
Also, splintering portions are not observed after cutting. A better quality of steel and aluminum structure helps give this kind of structure a sustainable performance. Besides the steel and aluminum structure, the rest are made of plastic.
An angle guideline is attached near the cutting head. Consequently, it is possible to cut planks in angled shapes as demanded. No dust is produced during cutting. Also, no irritating noise from a hacksaw or any other cutting tools.
It comes in a flat pack, and assembly is needed to use. No carrying case is provided with it. But it is compact to carry.
Pros
- Durable
- Easy to use
- Quality structure
- Portable
- Lightweight
- Hand Powered
Cons
- For limited width plank
2. MANTISTOL MC-330 13″ Pro Vinyl Floor Cutter
CutTool’s MANTISTOL MC-330 Pro Vinyl Floor Cutter won’t be a bad option for cutting vinyl planks. This cutter has a durable body structure with a hex head-styled blade. A sustainable body made with sturdy, good, quality steel and heavy-duty aluminum construction gives a top-notch performance. The width of the cutting blades is 13 inches, and they can cut ⅝ inches.
Blades are consumable after it’s dull. It can be adjusted after the sides are changed. Generally, half of the blade is used. It can be adjusted while the other half is sharpened. Also included with Grit hone stone to keep it sharp.
Gives a fine clean edge cut with no dust and shattered part of the plank. Blades are set at a 45-degree angle. Any kind of power source is not required. The hand press is operational. The lever needs to be pressed down to cut the necessary slides. Also, no noise is made during the operation.
Consequently, it is easy to use. The operation method is quick enough and doesn’t require much force to use it. The rectangular cutter just needs to be installed by screwing in. The installation process is easy as well. Some accessories are also included with the body.
An angular guide is also included to cut vinyl plank at different angles as needed. The angular guide can be adjusted on the surface pad very easily.
Pros
- Lightweight
- Both sides of the blade can be used
- Comes with a stone to keep it sharpened
- Easy to use
- Hand pressed
- No power source required
- Easy to install
Cons
- No extra blade included
3. MantisTol 13″ Pro Vinyl Floor Cutter
MantisTol 13″ Pro Vinyl Floor Cutter from CutTool Ltd. is an absolute choice for vinyl floor cutting. With 13 or 9 inches wide blade and 8 inches thickness cutting ability, a proper professional cutter for vinyl planks. It is a complete package with a 0 to 45-degree angular 2.2mm thick tungsten steel blade.
Cutters like these cut planks into a clean edge end product. It easily fits into necessary positions without producing any dust and noise. Mechanical structures are made of aluminum that weighs 14 pounds.
One of the critical features of the product is removable blades. That helps to cut vinyl planks in a rectangular shape from the middle of the specimen. This can be possible with the adjustment of the blade.
It comes with a 600 Grit oilstone to keep sharp that helps it remain sharpened from becoming dull. A blade can be dull after 500 square feet of installation. The blade can be changed if it’s needed.
Besides, the product comes in black and in two variants- one with a 13-inch blade and another one with a 9-inch blade. Also, no power source is necessary while using and. hand-pressed operational. Have a lever to pull for operating. The handle is made of aluminum and designed in an ergonomic way.
A guideline tool is also included for adjusting vinyl slides for angular cuts. The guideline tool can be adjusted as needed. This guideline tool helps make it easier to cut vinyl planks. That takes the operation more user-friendly and helps to avoid faulty cuts.
Pros
- Comes with an adjustable blade
- Ergonomically designed handles
- Easy to use
- Included with accessories
- Installation can be done with a screw
- Durable
- Lightweight
- Compact shape
Cons
- For limited width plank
4. CHILI Tools Linoleum Knife
CHILI TOOLS’s Linoleum Knife is a tremendous tool for cutting vinyl floors manually. A knife with a carbon steel blade is quite a good tool for manual vinyl floor cutting. This type of curved pointy blade can be used for multiple purposes.
The inner edges of the Blade are sharpened for a clean cut along the edges of vinyl planks. The tapered portion of the Knife is applicable for cutting. The Knife can also crease the vinyl planks along the corner between the floor and the wall.
This handy Knife is also used for pulling up attached vinyl flooring slides when necessary. With a hammer, the Knife’s thin blade can be inserted beneath the flooring slides to pull that over.
Further, the ergonomically designed handle is easy to hold with a proper grip. The handle comprises 15% Polypropylene polymer and 35% Thermoplastic Rubber, that is non-toxic for health and fully recyclable. Handles come with two different types of color combinations. One is Blue-Black, and another one is Red-Black.
The Knife is easy to use. Also, the blade is very durable with rust resistance. This Knife of 3.2 ounces can be carried anywhere easily and also can be hung with a hanger hole. A safety cap is also included with the Knife.
Pros
- Can be used for multiple purposes
- Lightweight
- Durable
- Easy to carry
- Ergonomically designed handle
- Easy to use
- Rust resistance
- Comes with a safety cap
- Recyclable materials are used
Cons
- Excessive hammering can damage the handle
5. Red Devil 4608 2.5-Inch Heavy Duty Vinyl Flooring Knife
Red Devil’s this 4.2 ounces knife is a heavy-duty tool for cutting vinyl floor planks. With a pointy curved design, the Knife is able to cut any vinyl flooring slides, that is just a matter of time for this high-carbon steel blade.
The tapered portion is a beneficial part of the Knife to initiate cutting vinyl flooring slides. The other edge of the Knife is the non-sharpened portion. It is also used to make an impression on the material to generate a guideline to cut.
The Knife is also used for ripping attached vinyl flooring planks with some help from hammers. Blades of these knives are thin enough to insert beneath a flooring material for ripping off. For multiple purposes, the knives can be used.
Using this type of sharp blade, the handle gives a better grip on the hand with a proper balance. The handle is made of non-toxic polymeric materials. There is a hanger hole to hang the Knife. With a lighter weight, the Knife can be carried easily.
It comes in Black-Red. With hand-powered pressure, this is very easy to use. But this required skill for desired performance.
Pros
- Easy to use
- Heavy duty performance
- High-carbon steel blade.
- Lightweight
- Handy
- Ergonomically designed handle
- Hand Powered
- Durable
- Easy to carry
Cons
- Skill required
6. XW Folding Vinyl Knife, Heavy Duty Utility Knife with Protective Cap
With a durable zinc-alloy structure, a foldable knife for vinyl flooring cutting knife is a wonderful tool. This product from XW has some unique features also with a unique look. The whole Knife is a compact package. Safety is prioritized and has been cleared by its design gesture.
The Knife can be unfolded by sliding the side slider backward. Also, there is a Thermoplastic Rubber grip for holding the Knife properly. Therefore, a proper grip offers excellent control of the Knife during different operations.
This durable structure is made of zinc alloy. SK2 slotted blades are used in this Knife. Both sides of the Blade are sharpened. The Blade can be easily changed by sliding the blade slider backward easily. Also, it is less time-consuming.
The Knife comes with extra five blades. There is also a safety cap on the Knife. This Knife is available in 3 types of color: silver, black, and yellow, with a metallic finish. With 5.9 ounces of weight, a knife like this is easy to carry and use.
A sharp blade like this cuts vinyl flooring plank in a clean cut with less dust. For the desired amount in the desired shape, skillful hand is also required.
Pros
- Safe to carry
- Compact
- Included five extra blades
- Comes with a safety cap
- Durable
- Better grip
- Lightweight
- Handy
- Both sides are sharpened
Cons
- Skill required
Suggestions for buyers
If the goal is to complete an entire floor with vinyl flooring and the floor is a couple of hundreds of square feet in a area then these vinyl flooring cutters would be suitable to complete a task like this:
- Norske Tools Newly Improved NMAP001 13-inch Vinyl Flooring Cutter
- MANTISTOL MC-330 13″ Pro Vinyl Floor Cutter
- MantisTol 13″ Pro Vinyl Floor Cutter
If the main requirement is that the job needs to be done and the price point is also a fact of the matter then the cutter from Norske Tools Ltd would be a great option. With being a durable cutter, it’s also a cheaper one.
In the same way, the cutter from CutTool Ltd. is also an excellent option for purchasing. This cutter is a value-for-money product for sustainable usage.
And last but not least, CutTool Ltd.’s cutter is a great option. Comparatively, the price point of than other two is really expensive. Also, it comes with more functions and features as well.
Buying Guide for Vinyl Floor Cutter
As there are different types of tools to install vinyl flooring. Some are cutters with levers to operate, and some are just a knife to cut the vinyl planks. A guideline will be beneficial when purchasing these kinds of products.
Material
There is no option for compromising when it’s about the material. The durability and life span of any product depend on its material quality. For vinyl flooring cutters, it is also important to notice while purchasing.
A vinyl cutter can be a lever-pulling cutter or can be just a knife. If a buyer is looking for a lever-pulling vinyl plank cutter, then there are many more things to be aware of than a vinyl plank cutting knife. In a lever-pulling cutter, there are so many mechanical functions in the cutter.
Most vinyl flooring cutters in the market nowadays are made of steel, aluminum, and zinc alloy. In some of the parts of it, plastics are also used. Gives proper durability and a stable structure to its body. When buying these products, it is really important to know the material that that brand offers at that price point.
On the other hand, the blade is an essential thing of the cutter that cuts the vinyl plank. A dull blade makes a whole product useless even if the mechanism of the cutter is working well.
Blades are often made of tungsten. It also can be made of stainless steel or other material. In the lever, there is also a grip that is made of different polymeric materials. A better grip is also helpful for long-term use.
Suppose the vinyl cutter is a knife, then there is lesser material and complexity than lever pulling vinyl flooring cutter. This type of Knife contains a blade and a grip. Blades are often made of carbon steel or zinc. The grips are made of polymeric materials. Polymers are like thermoplastic materials.
Accessories
With a complete package of a vinyl cutter, some additional accessories come. It depends on the brand. Accessories are like guiding tools or tools for installation. In some cases, some extra blades are also provided.
These all rely on the brand marketing strategy or different price points. Even some of them come with a stone to sharpen the blade. With these other vinyl flooring cutters, some user manuals are also provided. According to some conditions, there can be a product warranty agreement.
Safety
When the product belongs to a hardware section, then undisputedly, there is always an uncertainty of safety. Safety measures need to be taken by inspecting a product before buying. There is some probability of having flaws causing the manufacturing process. Also, following the given instructions in the manual is a necessity.
Final Verdict
Vinyl flooring installation is one of the easy methods for floor decoration. But it requires a precise operation during installation. In that place, vinyl plank cutters are used for a clean cutting edge, which fits edge-to-edge construction.
These cutters are available at different price points and with various features. Provides outstanding performance that makes a bold impact on decorating a floor.
